The Cobra USB Programmer allows users to connect their Cobra Mini FPV speed controller to a PC computer so that they can make firmware changes, or perform firmware updates. This programmer works with both the 20 amp and 30amp Mini FPV ESC's, as well as the Cobra Wing Series and High Voltage ESC's.
Please Note: This programmer will NOT work with the Cobra Airplane Series ESC's that have a green strip on the label. For these ESC's you need to use the Cobra ESC Programming Card.
The programmer plugs directly into a USB port on any Windows PC, and is self-powered from the USB port. When used with Windows 7, 8, 8.1 and 10, the drivers for this programmer are already included in the driver database, and will automatically load when the programmer is plugged in for the first time. For older PC's running Windows 2000, XP or Vista, a driver must be installed before plugging the programmer in for the first time. A link to this unified driver can be found below.
A Graphical User Interface (GUI) program is also required to allow the user to make changes to the existing firmware, or to load new versions of firmware.