Ford Raptor R: 4X4 VXL 1/10 Scale 4X4 Brushless Replica Truck

Roll over image to zoom in

Ford Raptor R: 4X4 VXL 1/10 Scale 4X4 Brushless Replica Truck

Name: Ford Raptor R: 4X4 VXL 1/10 Scale 4X4 Brushless Replica Truck
Brand: Stone Blue Hobbies
Price: 529.99 USD
Availability: OutOfStock

Share this product

RAPTOR R STYLING. PRO SCALE^® PERFORMANCE.

The Traxxas Raptor R^™ is the newest member of the innovative Traxxas Pro Scale^® lineup. Superb scale detail and proportion combine with 4X4 traction and extreme Velineon^® brushless horsepower to faithfully capture the Raptor R^™ driving experience. Only Traxxas Pro Scale^® delivers both the exacting realism and unbeatable speed and durability performance drivers demand.

PRO SCALE DESIGN

Only Traxxas Pro Scale combines pro-level performance with the look and feel of a real Ford Raptor R. The Traxxas Raptor R stops the show with a Ford-licensed body and molded replica parts for maximum scale authenticity. Velineon^® brushless horsepower and an extreme heavy duty 4WD driveline give Raptor R performance credentials to match its stunning looks.

EXTREME HEAVY DUTY UPGRADES

The Extreme Heavy Duty Upgrade Kit comes pre-installed on Raptor R to withstand the brutal punishment of high-power brushless systems. Made from our toughest cold-weather material, Raptor R’s driveshafts and suspension components are beefed up with extra material and overbuilt construction to form a nearly indestructible driveline.

CLIPLESS BODY MOUNTING

High-flying stunts and 60+mph desert speed runs won’t upset Raptor R’s tough clipless body. Locking tabs hold the body tightly, but release in just seconds to access the chassis. Raptor R’s hidden latching system maximizes convenience and scale realism by removing traditional body clips which would interrupt the body’s clean lines.

Officially Licensed Ford^® F-150^® Raptor R™ Pro Scale^® Clipless Body and Graphics
- Molded scale details: bumpers, grille, tailgate, side mirrors, and hood vent
- LED lighting in front and rear bumpers
- Body reinforcements to prevent pull-through damage
Clipless Body Mounting
- Holds tight for intense action
- Quick and easy removal
- Smooth appearance with no body posts or clips
Extreme Heavy-Duty Upgrade Kit Installed
- Made from our toughest cold-weather resistant composite
- Strengthened C-hubs, axle carriers, steering blocks, and shock towers
- Extreme heavy-duty driveshafts
  - Oversize diameter
  - 6 mm axles
  - Steel wheel hexes
VXL-3s^™ Waterproof Electronic Speed Control
- Cooling fan with large heat sink
- Three Programmable Drive Profiles
  - Sport Mode - Forward / Brake / Reverse
  - Race Mode - Forward / Brake
  - Training Mode^™ - 50% Forward / Brake / 50% Reverse (patented)
- Traxxas EZ-Set^® one-button setup
- Built-in two-stage low-voltage detection for LiPo batteries
- NiMH battery packs: 4-9 cells (4.8 to 10.8 volts)
- LiPo battery packs: 2-3 cells (7.4 to 11.1 volts)

Up to 60+ mph with 3s LiPo battery
Velineon^® 3500 kV Brushless Motor
- Ultra high-temperature sintered Neodymium magnets
- Optimized for power and efficiency in 1/10th scale vehicles
- Efficient, high-speed ball bearings
- Precision-balanced rotor
- 3500 kV
- Brilliant blue-anodized finish
Traxxas Stability Management^® (TSM)
- Improves straight line acceleration and braking on low-traction surfaces
- Maintains steering composure to allow throttle-on powerslides
- Never dulls throttle or slows the truck
- Adjusts from off to 100% assistance from the transmitter
TQi^™ 2.4 GHz High Output Radio System
- TQi^™ 2-channel transmitter
- Automatically stores and loads settings for up to 30 Traxxas Link-enabled models
- Programmable multi-function knob
- Adjustable steering and throttle percentage (dual rates)
- Adjustable steering and throttle sensitivity (exponential)
- Adjustable steering and throttle end points
- 5-channel micro receiver (6533) with fail-safe security
- Patented waterproof receiver box with easy-access plug

Chassis
- Extended modular composite tub design
- Secure battery hold-down latch
- Side nerf bars for impact resistance
Drivetrain
- Full-time shaft-driven 4-wheel drive
- Oil-filled steel gear front and rear differentials
- Large 32-pitch steel spur gear
- Anodized-aluminum center driveshaft
Steering
- Chassis-mounted 2075 servo
- Dual bellcrank design with integrated servo saver
Suspension
- Heavy-duty suspension arms
- Adjustable 4 mm steel toe and camber links
- Oil-filled Ultra Shocks
- White powder-coated progressive springs
Wheels and Tires
- Licensed Ford replica option wheels
  - 2″ outer diameter, 3″ inner diameter
- Licensed BFGoodrich^® All-Terrain T/A^® KO2 tires
- Larger114 mm diameter
Sealed Ball Bearings
Hex hardware with Rust-Resistant Black Oxide Coating

Recover password

Create my account

Ford Raptor R: 4X4 VXL 1/10 Scale 4X4 Brushless Replica Truck

Description

PRO SCALE DESIGN

EXTREME HEAVY DUTY UPGRADES

CLIPLESS BODY MOUNTING

You may also like

Recently viewed